Roomba is a series of autonomous robotic vacuum cleaners made by the company iRobot. Roomba cleans the floors of your home automatically using sensors to move and collect dust. After its launch in September 2002, Roomba became one of people’s favorite vacuum cleaners. But just like any other machinery it also has some errors that pop up out of nowhere. Roomba C510 Error is one of the most common errors faced by users.
And most of the Roomba users don’t even know how to fix this error message. If you’re one of those users then you’re at the right stop. Here in this article, we will be going to tell you how you can easily fix the Roomba C510 Error message.
So now without any further delay let’s start the article and discuss the fixes of the Roomba C510 error. But before that let’s first discuss what exactly the Roomba C510 error is and why it is showing up on your Roomba Vacuum cleaner.
Table of Contents
What is Roomba C510 Error?
Roomba C510 Error message is one of the most common errors faced by the Roomba Series J Vacuum cleaners. The error message basically indicates that there is a problem with the vacuum motor.
However many users reported that there is no such problem with the vacuum motor. Instead, when the connection is unstable the vacuum screen displays the C510 error message. So in short we can conclude that the problem is either with the vacuum sensors installed in Roomba or with the connection.
What are Common Errors in Roomba and What are the Causes?
There are many errors that are faced by the Roomba J series users. Some of the most common errors that are faced by Roomba users are:
- Error 1: This Roomba error indicates that the Roomba bumper is not registering obstacles. The cause of this error are dirty bumper sensor or a malfunctioning bumper.
- Error 2: This error code suggests that the Roomba Brushes are stuck. This error can be caused due to the hairs or debris getting wrapped around the brushes.
- Error 3: This error code shows up when the vacuum unit is not working properly. This could happen due to a malfunctioning vacuum motor or a dirty filter.
- Error 5: This error code means that your Roomba Vacuum’s cliff sensors are dirty or malfunctioning. This could prevent the Roomba from detecting stairs or ledges.
- Error 6: This error means that the Roomba Wheels are stuck. This can happen due to the hair or debris getting stuck around the wheel.
How to fix the Roomba C510 Error?
If you’re seeing the C510 Error code on your Roomba Vacuum cleaner. The problem is with your Roomba’s Vacuum Bin. To fix that you need to remove it, clean it, and reinstall it on your Roomba Vacuum.
If you don’t understand the full process then follow the below given step-by-step guide to fix the Roomba C510 Error easily.
Step #1. Remove the Roomba’s Vacuum Bin
The first thing you need to do is remove the Vacuum bin of the Roomba Vacuum cleaner. To remove the bin just press the bin release button present at the back of the machine. After pressing it the vacuum will detach its vacuum bin from the robot. Now check if there is any damage or problem with the vacuum bin. And if not then move to the next step below.
Step #2. Clean the Vacuum Bin
After inspecting the vacuum bin if you still can’t find any damage to it then the problem might be with the cleanliness of the bin. Sometimes dust is the reason why the sensors aren’t working properly. So check the whole vacuum bin thoroughly for any dust or debris in the bin, sensor, or connection port. After that take a soft cloth and clean the dust and debris from the vacuum bin gently.
Step #3. Reinstall the Vacuum bin to the Roomba
Once you cleaned the vacuum bin you need to reinstall it on the Roomba vacuum. To reinstall it just slide the vacuum bin back into the bin slot till it makes a connection. Once the bin is attached properly with the vacuum cleaner it will establish a connection and will be able to work properly.
Step #4. Restart the Roomba Vacuum
At last, restart the Roomba vacuum to see if you’re still getting the Roomba C510 Error or not. Just press the power button on the robot to restart it. Once the machine is turned on you will notice that the C510 error is gone. If the vacuum cleaner beeps a green light and you hear a voice saying “Ready To Clean”. Then that means the error is successfully fixed and now your Roomba vacuum will work properly.
If the error is still not fixed then we recommend you contact Roomba Customer Care. Explain your issue to customer care thoroughly they will surely try to help you fix the error issue.
Conclusion
In the above article, we discuss How to Fix the Roomba C510 Error. But in case you still have doubts and want our further guidance then feel free to contact us anytime. We will try to reach out and help you as soon as possible.
Also Read: What is Windows Error 0x0 0x0? How to Fix it?
